How to Make Easter Iced Biscuits

Create these gorgeous Easter biscuits to show off your intricate piping skills, using beautiful Renshaw Ready to Roll icing shades in pastel as an icing base. Follow the tutorial below by Renshaw to find out how their baking experts created the pictured biscuits.

You Will Need Craft Essentials

Shortbread dough pre-made and chilled

Pastry brush

Apricot Jam, Boiled and cooled

Flour

Icing sugar

Water, boiled and cooled

Lined baking tray

Rolling pin »

How to Make

Baking the Biscuits:

  1. Pin out the dough on a clean surface lightly dusted with flour. Cut as many shapes as required using the Hobbycraft cutters.
  2. Place the shapes on a greased and lined baking tray and bake as per the recipe. Clean utensils and work surface.
  3. Remove from the oven and allow to cool on a wire rack.
  4. Prepare the biscuits by brushing over the surface with a thin layer of apricot jam.

Decoration:

  1. On a clean, dry surface knead the coloured icing of choice until pliable.
  2. Dust the work surface with icing sugar and pin out the icing until 2-3mm thick.
  3. Using the same cutter used for the biscuit dough, cut out as many shapes as required. Carefully place the icing on to the top of the biscuits and gently smooth down with the palm of your hand.
  4. Royal Icing preparation: Make a piping bag containing a no2 tube.
  5. Using the palette knife, spread the Royal Icing back and forth onto a clean, dry surface until smooth. Adjust the consistency with a drop of water to soften if required.
  6. Fill the piping bag fitted with the no.2 tube 1/3 of the way full.
  7. Pipe a variety of long, swirling lines up the centre of the biscuit. As seen in skin tone egg picture. And embellish the lines with a series of dots.
  8. Next, pipe two more swirling lines either side. One long, one short. These can be embellished with triangular leaf shapes to create vines.
  9. Use any combination of lines and dots to give different finishes to your biscuits!

Tip: If the royal icing creates a peak when piped, take a small paint brush, slightly dampen with a wet cloth and gently pat down the peak.

Shop the project

What do you think of this post?

2 2

Comments and Discussion

Other posts you might enjoy

<
>