How to Make a Set of Holly Jolly Foam Topper Cards

If you’ve got lots of cards to make this Christmas and you’ve not got a lot of time on your hands, these super-quick and simple foam topper cards are ideal. With one Holly Jolly foam topper pack you can create five cards in next to no time!

You Will Need Craft Essentials How to Make
  1. Choose five sheets of paper from the 6 x 6″ Holly Jolly Paper Pack to co-ordinate with each of the foam toppers from the pack, and trim down to 12cm square using a paper trimmer or metal ruler and craft knife.

2. Die-cut a 7.5cm diameter circle through the centre of each of the five sheets of patterned paper. Round each of the corners on the card blanks, and then the chosen patterned paper sheets, using a corner punch.

Top tip: Use a small piece of craft tape to hold the die in position as it makes it’s way through your die-cutting machine

3. Wrap a length of ribbon around the bottom of each of the patterned paper panels, trim the ribbon 2cm longer than is needed so that the ends can be wrapped and secured on the back of the panel. Attach the completed panels to the card blanks using foam pads.

4. Remove the backing paper from the foam topper and attach centrally within the die-cut circle aperture.

Shop the project

What do you think of this post?

30 10

Comments and Discussion

Other posts you might enjoy