How to Create Shibori Tie Dye

Get ready for Summer with this quick and easy shibori technique. Have a go at dyeing some napkins or the ends of a table cloth, a great addition for any table arrangement!

You Will Need Craft Essentials

Scissors

String

Metal trays »

How to Make

  1. Start by cutting your piece of fabric into squares 30cm x 30cm. Fold one of the pieces in half and roll up. Tie an elastic band as tight as you to one end.     
  2. Continue tying elastic bands to your fabric equal spaces apart until you run out of space.             
  3. With another square piece of fabric, fold in half diagonally. Twist the fabric and fold in half again. With your string, tie one end to the wrapped fabric and bind around the fabric.         
  4. You will want to bind the string nice and tight, this will stop the dye from reaching these bits of the fabric.       
  5. For a different technique, fold your piece of fabric into a small rectangle. Using lollypop sticks, place one either side of the folded fabric and secure with elastic bands either end.         
  6. Repeat this technique to cover the fabric, try to keep them evenly spaced. The dye will be resisted under the pressure of the sticks.         
  7. Another shibori technique, which is very similar to tie dye. Taking some rubber bands and ties them around bunched up sections of the fabric.           
  8. Tie as much as the fabric as you would like. You can also bind string around to create the same effect.         
  9. With another piece of fabric, fold in half and then concertina the fabric, like you were making a fan. 
  10. Place a lollypop stick on either side of the fabric and secure tightly with two elastic bands.                  
  11. To create a nice triangle pattern, fold your fabric up into a square.             
  12. Fold the square in half to create a triangle. Place two lollypop stick on either side of the triangle. Secure tightly with some elastic bands either end of the sticks.                   
  13. Once you have bundled all your pieces of fabric together place them in some metal             
  14. Following the instructions on the packaging to make up the dyes, wearing gloves, cover the pieces of fabric in the dye. Try not to soak the fabric bundles.           
  15. Once you have finished with the dye bottles, wrap each piece of fabric in some cling film so they don’t dry out. Leave for 6-8 hours.       
  16. Unwrap the pieces of fabric and rinse with cold water.

 

Shop the project

What do you think of this post?

32 4

Comments and Discussion

Other posts you might enjoy

<
>