How to Make a Framed Family Tree

IMG_0978-2

Looking to make a present for your dad this Fathers day, but struggling to decide what to do? Well look no further! This memory box frame is great for personalising, so easy to make and something that your dad can treasure forever.

Skill Level: Beginners
Time to Make: 30 minutes

You Will Need
How to Make

1. Before getting stuck in, decide on what you would like your letters to spell out as well as how you are going to arrange them. It is important to do this first because then you can work out if it will all fit in the frame, if not you can always rearrange your words and rethink the layout.

Top Tip…Planning out how your frame is going to look will help stop wastage from happening, especially if you have chosen a particular piece of card and decorations to use. 

IMG_0735_2

2. Using a La De Dah poloroid frame can also help to work how much room you have to stick down your letters as well as how much room you will need for the polaroid frame.

IMG_0756_2

3. Once your letters have all been stuck down, you can decide on the placement of the polaroid frame so that you can stick down your photograph first. These frames are approx. 10 x 8 cm, so your photo needs to be no bigger than this.

4. Using some double sided tape, stick a few pieces onto the back and your photograph and then stick it down onto the card and then stick the polaroid frame on top. The polaroid frame is self adhesive so don’t worry about sticking double sided tape onto that.

5. Place the polaroid frame close to the letters to show the connection between the two.

IMG_0777_2
Helpful Hints…Feel you want to do a bit more with your box frame? Why not use some bows, buttons or gems to decorate it with…

IMG_0978-2

Shop the project

What do you think of this post?

28 4

Comments and Discussion

Other posts you might enjoy

<
>