How to Make a Photo Transfer Canvas
Made Dad’s day this Father’s Day with a truly personal gift he can treasure – a photo canvas! It’s so easy to create your own, for a fraction of the cost of getting it printed, so why not have a go?
1. Print out your photo to the required size for your canvas – check the size on the packaging. Don’t forget that the final image will be a mirror of what you currently see, so if you want it the other way round, reverse the image before you print.
2. Trim your paper with scissors, so that you are just left with your image and no spare white paper.
3. Apply a thick layer of glue onto your image, over the printed image. It should be thick enough so that you can’t see the photo properly. The larger your image, the thicker you need to paint on the glue.
4. Carefully place the image, glue side down, onto your canvas, and use your fingers to rub any air bubbles out, starting from the centre.
5. Leave to dry for at least 4 hours, or for best results, leave overnight.
6. To remove the paper, use a soaked sponge or dabbers and press lightly onto the top of the paper. The water should slowly begin to soak into the paper, making it soft and mushy. Start to gently rub away the layers of the paper using either your fingers or the sponge, until you’ve taken away most of the top layer of paper. Leave to dry.
Top Tip! . . . Remember, less is more – you can’t add ink back to your image if you rub too vigorously and take off the image too! Keep re-dampening your sponge if you are having trouble.
7. Once dry, if there is any more paper residue left, rub it off with your fingers or a moist sponge. Make sure you remove all of the pulp left behind by the paper, or it will give you a white covering on your image.
8. To seal your image, use a few drops of the image maker glue over the top of the image, and gently rub in with a clean cloth or brush. Leave to dry.